DishSkinz Installation Guide for DISH 500 Size

• When unpacking your DishSkinz from the shipping package, don't throw out the 2-sided adhesive tape...you will need it.
• Handle your DishSkinz with caution - any damage may interfere with your satellite signal.
• While installation is easily done before your satellite dish has been set up, DishSkinz can also be installed on a satellite dish that is already mounted.
• For best installation results, temperature should be over 50°.

Installation of the DishSkinz Satellite Cover

Step 1
Make sure your DishSkinz is clean and free of oils or dirt that can affect proper adhesion. We suggest wiping the surface of your satellite dish with alcohol.

Step 2
Peel off the backing on one side of each enclosed adhesive strip and affix it to the center, 12, 4 and 8 o'clock positions on the backside of your DishSkinz.

Step 3
Remove the remaining backing on each piece of adhesive tape. Make sure you are lined up properly before applying pressure, as the DishSkinz cannot be easily removed to realign. You can also damage the adhesive tape that you need for proper mounting.

Step 4
Carefully apply moderate pressure over the face of the dish to ensure the tape achieves maximum hold between the DishSkinz and the dish surface.

Installation is now complete!

Use extreme caution when securing your satellite skin to a dish already mounted on a rooftop or high wall location. We recommend you have help in these types of installation situations.

Installation of your DishSkinz will not interfere with your satellite signal.

***Please note that DishSkinz, assumes no responsibility for any injury or loss of life due to incorrect or unsafe installations. Please ALWAYS think of safety first!

Please enjoy your new DishSkinz. Display it proudly. We do!

Regards,

The DishSkinz Team.